Napco Security Technologies GEM-RP3DGTL Manual de usuario descargar pdf (Pagina 19)

KEYPAD FUNCTIONS

14. Activate EZM Zone Find? For installer's use only. If accidentally enabled,

press the C button to exit.

15. Activate Telephone Test? (Telephone Test programmed? YES NO.)

Sends a communicator test to the central station. A communication failure will be

indicated at the keypad by a system trouble “3” display. Repeat the test to attempt

to correct a communication failure, as any successful communication will clear

this display.

16. Delay Arming 1-4 Hours. (Not for UL-listed systems.) Allows automatic arming

to be delayed up to 4 hours, 15 minutes, as follows:

For a 1-hour, 15-minute delay, press [1], then the Jbutton.

For a 2-hour, 15-minute delay, press [2], then the Jbutton.

For a 3-hour, 15-minute delay, press [3], then the Jbutton.

For a 4-hour, 15-minute delay, press [4], then the Jbutton.

Fifteen minutes prior to arming, the siren will sound a 2-second warning and the

keypad will begin a 15-minute countdown with the sounder pulsing. During this

time, arming may be delayed an additional 1 to 4 hours (as above), or autoarming

may be cancelled by arming and disarming the panel.

INTERIOR

BYPASSFIRE/TBL

SYS TBL

CHIME

INTERIOR

BYPASSFIRE/TBL

SYS TBL

CHIME

INTERIOR

BYPASSFIRE/TBL

SYS TBL

CHIME

GEM-RP3DGTL.pub

page 19

Wednesday, August 18, 1999 14:03

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Sin comentarios

Napco Security Technologies GEM-RP3DGTL Manual de usuario Pagina 19